Android 12 Guide Terminal Board for Information Point, WF-G3399, AndroidSBC, Amsterdam

TL;DR: Android 12 Guide Terminal Board for Information Point

AndroidSBC software desk: Android 15 baseline and staged OTA channel published for the WF-G family serving Amsterdam, Netherlands. The WF-G3399 smart guide kiosk Android motherboard spans the dual-screen high-definition guide kiosk and eleven sister models in the WF-G series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 64-bit SoC with the ARM Mali-T860 MP4 GPU, dual HDMI 2.0 4K output plus eDP, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Amsterdam and Netherlands importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

Why a source factory rather than a trading company: the WF-G smart guide kiosk Android motherboard family is designed, laid out, assembled and tested by Wanlin Manufacturing Group in Shenzhen, which means Amsterdam integrators deal with the people who control the BOM. Custom display interfaces, custom touch controller pairing, custom memory and storage splits, custom dual-screen configurations and custom payment or ID reader interfaces are all changes that happen at the schematic and layout stage rather than as a favour from a middleman. Netherlands buyers also get the failure analysis loop: when a board comes back, the report comes from the line that built it, not from a distributor forwarding a ticket. OEM private label starts at 100 pieces, ODM carrier board work at 500 pieces, and both tracks keep the same seven-year firmware window that applies to the standard Amsterdam and Netherlands catalogue SKUs.

WF-G3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3399 (dual-screen high-definition guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Netherlands importers sourcing the WF-G family, the WF-G3399-A variant is the typical configuration for the hotel lobby and resort directory terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Netherlands Buyers

The sixth obstacle is lifecycle mismanagement. Amsterdam programmes that start on a legacy part find themselves two years in with no spare boards, no firmware source and no migration plan, and Netherlands venue fit-out cycles are longer than the parts remain in production.

AndroidSBC treats the driver layer as part of the product. The WF-G smart guide kiosk Android motherboard family ships with capacitive and IR touch, QR code, NFC, barcode, thermal printer, RFID, ID card reader, camera and relay drivers integrated, so aan Amsterdam integrator writes the directory application rather than kernel patches for Netherlands sites. AndroidSBC booked 79600 boards for Amsterdam and Netherlands on the Rotterdam - Shanghai lane as of September 18, 2026, the 6th release on this programme.

Competitive Comparison: WF-G3399 vs Competing Smart Guide Kiosk Android Boards

The shortlist conversation in Amsterdam and Netherlands rarely turns on clock speed alone. It turns on how quickly a visitor can go from standing in front of a directory to knowing which floor to walk to, and which board vendor has already solved the touch panel, the compliance files and the update path for that moment.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Venue operators are consolidating screen estates onto fewer board platforms: dual-screen high-definition guide kiosk programmes in Netherlands used to be quoted per site with a different controller each time; Mordor Intelligence and Technavio both track the same consolidation direction in self-service hardware. For Amsterdam buyers the consequence is that a single dual-screen high-definition guide kiosk platform has to serve a floor directory, a promotional wall and an information point, provided the board supports independent dual display output.

• Mall floor directories and tenant finders: WF-G3399 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G8800 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G8800 and the industrial WF-G8801 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G8801 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

For Amsterdam buyers the takeaway is narrow: specify the Netherlands compliance set and the content client at the same time as the silicon, or the estate gets re-qualified later.

Partner Success Story: Kanto Guide Systems (public venue guidance integrator)

A Kanto Guide Systems rollout in the Japan public venues segment shows how the WF-G smart guide kiosk Android motherboard family works in practice for Amsterdam integrators. Kanto Guide Systems deployed 79600 WF-G guide boards across municipal halls, transit concourses and hospital orientation points in the Kanto region.

• OEM relationship: AndroidSBC private-label SKU shipped with Kanto Guide Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus AT NL conformity, all bundled into the Shenzhen source-factory shipment.

As Kanto Guide Systems Platform Lead for Japan Public Venues put it: Kanto Guide Systems runs unattended orientation points, so the hardware watchdog, scheduled power cycling and staged OTA on the WF-G board removed a whole class of site visits for the 79600 units now live in Amsterdam.

Field Report: lobby directory terminal installation at a business hotel group

BAOLONG, Shenzhen, September 18, 2026 - Liang Shu, AndroidSBC field desk. The final gate was a driver autoload check: the WF-G3399 boards booted with the full peripheral set attached and enumerated every module before the dual-screen high-definition guide kiosk content service started. The WF-G3399 smart guide kiosk Android motherboard order for Amsterdam, Netherlands cleared the burn-in station on schedule and is en route via the Rotterdam - Shanghai lane.

The WF-G3399 dual-screen high-definition guide kiosk production lot includes the WF-G3399-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Netherlands integrators, the AT NL conformity plus CE marking with Agentschap Telecom radio interface notification paperwork is bundled.

Filed by Liang Shu, AndroidSBC field desk, BAOLONG, Shenzhen. CE plus AT NL; Rotterdam is the main consolidation hub for European self-checkout rollouts.

WF-G3399 Application Scenarios

The WF-G3399 dual-screen high-definition guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3399-A configuration is the typical build for the hotel lobby and resort directory terminal use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3399 plus WF-G3600 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G3601 plus WF-G3399 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G3602 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G3566 plus WF-G3600 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G3601 plus WF-G3566 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G3600 plus WF-G3602 carry the guest orientation flow in Amsterdam.
• Exhibition and museum interpretive display points: WF-G3399 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G3566 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Amsterdam: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Amsterdam Buyers

For Netherlands buyers the WF-G family can be taken as a private-label product, as a custom design or as a stock catalogue item, and Amsterdam partners usually start on one track and ladder up.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

All three tracks run on the same twelve-model WF-G family and the same Longgang production line, so Amsterdam partners can move between them without re-qualifying the platform for Netherlands.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a dual-screen high-definition guide kiosk?

Answer: Yes. The dual-screen high-definition guide kiosk is a stock configuration on the WF-G family across the Rockchip premium, mid and legacy tiers and the Allwinner entry and industrial tiers, with capacitive and IR touch, QR, NFC, printer and scanner driver support bundled into the source-factory shipment.

What is the real difference between the RK3399 tier and the other silicon tiers in the WF-G family?

Answer: The RK3399 tier in the WF-G family is one of eight. Rockchip RK3588 8nm runs octa-core Cortex-A76 2.4GHz plus Cortex-A55 with the Mali-G610 MP4 GPU and 6 TOPS NPU. RK3568 22nm runs quad-core Cortex-A55 2.0GHz with the Mali-G52 2EE GPU and 1 TOPS NPU, and RK3566 22nm runs the same core at 1.8GHz with 0.8 TOPS. RK3288 28nm is quad-core Cortex-A17 1.8GHz 32-bit with the Mali-T764 GPU, and RK3399 28nm is dual Cortex-A72 plus quad Cortex-A53 with the Mali-T860 MP4. Allwinner A133 and H618 are 22nm and 28nm quad-core Cortex-A53 entry parts, and Allwinner T527 is a 22nm octa-core Cortex-A55 industrial part with the Mali-G57 MC1 GPU and a 2 TOPS NPU.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Netherlands?

Answer: Yes. AndroidSBC ships the WF-G family with CE, FCC, UKCA, RoHS and REACH documentation, plus AT NL conformity and the CE marking with Agentschap Telecom radio interface notification file set for Netherlands. The paperwork travels with the Port of Rotterdam shipment rather than arriving as a follow-up email.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: AndroidSBC accepts sample orders from one piece up on the WF-G family, with a 1-3 day sample lead. The OEM track opens at 100 pieces, the ODM track at 500 pieces, and bulk production runs 15-30 days from BOM sign-off.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. Custom Android and custom Linux builds are part of the ODM programme on the WF-G family. AndroidSBC works from the reference BSP, adds the partner applications and drivers, and keeps the result on a versioned branch so Amsterdam teams can reproduce the build.

How are software updates and long-term support handled on the WF-G family?

Answer: Updates are staged, not pushed blind. The WF-G family ships with a staged OTA channel, rollback, remote configuration and device telemetry, so a Netherlands estate can be updated site by site and a bad build can be reversed before it reaches the whole fleet.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. AndroidSBC ships direct to Amazon FBA or a nominated 3PL for Netherlands buyers, on FOB Shenzhen, CIF Port of Rotterdam or DDP terms, with serialised labels so each carton can be traced to a production lot.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: Yes. For the WF-G family AndroidSBC replaces DOA boards from buffer stock and repairs or replaces RMA units in-house, with the failure analysis returned to the Amsterdam integrator so the same fault does not recur on the next lot.

Contact AndroidSBC: Start Your WF-G3399 Sourcing Conversation

To start a WF-G smart guide kiosk Android motherboard sourcing conversation with AndroidSBC, Amsterdam integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Netherlands buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-G family.