CE/FCC/RoHS Certified Guide Board, WF-G3601, AndroidSBC, Amsterdam

TL;DR: CE/FCC/RoHS Certified Guide Board

AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-G smart guide kiosk board family serving Amsterdam, Netherlands. The WF-G3601 smart guide kiosk Android motherboard spans the mall smart guide kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus MIPI DSI, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Amsterdam and Netherlands importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

Why a source factory rather than a trading company: the WF-G smart guide kiosk Android motherboard family is designed, laid out, assembled and tested by Wanlin Manufacturing Group in Shenzhen, which means Amsterdam integrators deal with the people who control the BOM. Custom display interfaces, custom touch controller pairing, custom memory and storage splits, custom dual-screen configurations and custom payment or ID reader interfaces are all changes that happen at the schematic and layout stage rather than as a favour from a middleman. Netherlands buyers also get the failure analysis loop: when a board comes back, the report comes from the line that built it, not from a distributor forwarding a ticket. AndroidSBC keeps buffer stock on the Rockchip and Allwinner tiers so Amsterdam and Netherlands orders do not wait on a wafer allocation, and each production lot is locked to one BOM for traceability.

WF-G3601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3601 (mall smart guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Netherlands importers sourcing the WF-G family, the WF-G3601-A variant is the typical configuration for the mall floor guide and tenant query counter use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Netherlands Buyers

The sixth obstacle is lifecycle mismanagement. Amsterdam programmes that start on a legacy part find themselves two years in with no spare boards, no firmware source and no migration plan, and Netherlands venue fit-out cycles are longer than the parts remain in production.

AndroidSBC treats the driver layer as part of the product. The WF-G smart guide kiosk Android motherboard family ships with capacitive and IR touch, QR code, NFC, barcode, thermal printer, RFID, ID card reader, camera and relay drivers integrated, so aan Amsterdam integrator writes the directory application rather than kernel patches for Netherlands sites. AndroidSBC has now closed the 6th consecutive quarterly window on this family, with 171100 boards scheduled for Amsterdam and Netherlands on the Rotterdam - Shanghai lane as of September 18, 2026.

Competitive Comparison: WF-G3601 vs Competing Smart Guide Kiosk Android Boards

AndroidSBC positions the WF-G family on breadth rather than on a single benchmark number: eight silicon options, twelve models, one driver package and one update channel. That framing is what Amsterdam and Netherlands procurement teams compare against a two-tier competitor line-up.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

The outdoor and semi-outdoor slice is the fastest-moving part of the guide kiosk category. Smart city programmes across Netherlands are specifying information pillars for street level, transit interchanges and park entrances, and the constraint has moved from the touch panel to the board that has to run the directory, the network uplink and the thermal budget at once. Amsterdam integrators are specifying the mall smart guide kiosk tier against that reality rather than against an indoor datasheet.

• Mall floor directories and tenant finders: WF-G3601 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G3288 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G3288 and the industrial WF-G3399 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G3399 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

These figures are used by AndroidSBC as a demand baseline for Netherlands planning, not as a projection for any single Amsterdam programme.

Partner Success Story: Kanto Guide Systems (public venue guidance integrator)

The Kanto Guide Systems case in the Japan public venues segment is a working example of how the WF-G family from AndroidSBC supports Amsterdam integrators. Kanto Guide Systems deployed 171100 WF-G guide boards across municipal halls, transit concourses and hospital orientation points in the Kanto region.

• OEM relationship: AndroidSBC private-label SKU shipped with Kanto Guide Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus AT NL conformity, all bundled into the Shenzhen source-factory shipment.

As Kanto Guide Systems Platform Lead for Japan Public Venues put it: Kanto Guide Systems runs unattended orientation points, so the hardware watchdog, scheduled power cycling and staged OTA on the WF-G board removed a whole class of site visits for the 171100 units now live in Amsterdam.

Field Report: floor guide counter installation at a community shopping mall

SHENZHEN, September 18, 2026 - Jian Guo, AndroidSBC field desk. The final gate was a driver autoload check: the WF-G3601 boards booted with the full peripheral set attached and enumerated every module before the mall smart guide kiosk content service started. The WF-G3601 smart guide kiosk Android motherboard order for Amsterdam, Netherlands cleared the burn-in station on schedule and is en route via the Rotterdam - Shanghai lane.

The WF-G3601 mall smart guide kiosk production lot includes the WF-G3601-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Netherlands integrators, the AT NL conformity plus CE marking with Agentschap Telecom radio interface notification paperwork is bundled.

Filed by Jian Guo, AndroidSBC field desk, SHENZHEN. CE plus AT NL; Rotterdam is the main consolidation hub for European self-checkout rollouts.

WF-G3601 Application Scenarios

The WF-G3601 mall smart guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3601-A configuration is the typical build for the mall floor guide and tenant query counter use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3601 plus WF-G1330 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G1331 plus WF-G3601 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G6180 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G5270 plus WF-G1330 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G1331 plus WF-G5270 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G1330 plus WF-G6180 carry the guest orientation flow in Amsterdam.
• Exhibition and museum interpretive display points: WF-G3601 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G5270 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Amsterdam: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Amsterdam Buyers

Three partnership models are open on the WF-G smart guide kiosk Android motherboard family for Amsterdam and Netherlands, and they differ in how much of the design the partner owns.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

One production line in Longgang serves all three tracks, so aan Amsterdam partner who starts on the distribution track and later commissions an ODM design stays on the same Netherlands supply chain.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a mall guide kiosk?

Answer: Yes. The mall guide kiosk is a stock configuration on the WF-G family across the Rockchip premium, mid and legacy tiers and the Allwinner entry and industrial tiers, with capacitive and IR touch, QR, NFC, printer and scanner driver support bundled into the source-factory shipment.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: The RK3568 tier in the WF-G family is one of eight. Rockchip RK3588 8nm runs octa-core Cortex-A76 2.4GHz plus Cortex-A55 with the Mali-G610 MP4 GPU and 6 TOPS NPU. RK3568 22nm runs quad-core Cortex-A55 2.0GHz with the Mali-G52 2EE GPU and 1 TOPS NPU, and RK3566 22nm runs the same core at 1.8GHz with 0.8 TOPS. RK3288 28nm is quad-core Cortex-A17 1.8GHz 32-bit with the Mali-T764 GPU, and RK3399 28nm is dual Cortex-A72 plus quad Cortex-A53 with the Mali-T860 MP4. Allwinner A133 and H618 are 22nm and 28nm quad-core Cortex-A53 entry parts, and Allwinner T527 is a 22nm octa-core Cortex-A55 industrial part with the Mali-G57 MC1 GPU and a 2 TOPS NPU.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Netherlands?

Answer: Yes. AndroidSBC ships the WF-G family with CE, FCC, UKCA, RoHS and REACH documentation, plus AT NL conformity and the CE marking with Agentschap Telecom radio interface notification file set for Netherlands. The paperwork travels with the Port of Rotterdam shipment rather than arriving as a follow-up email.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: One board can be ordered as a sample on the WF-G family, shipped in 1-3 days. Private label starts at 100 pieces, custom carrier board work at 500 pieces, and volume production is quoted at 15-30 days from the signed BOM.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. Custom Android and custom Linux builds are part of the ODM programme on the WF-G family. AndroidSBC works from the reference BSP, adds the partner applications and drivers, and keeps the result on a versioned branch so Amsterdam teams can reproduce the build.

How are software updates and long-term support handled on the WF-G family?

Answer: Updates are staged, not pushed blind. The WF-G family ships with a staged OTA channel, rollback, remote configuration and device telemetry, so a Netherlands estate can be updated site by site and a bad build can be reversed before it reaches the whole fleet.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. For Amsterdam distributors the export desk can route the WF-G lot to a consolidation warehouse or FBA intake, with the AT NL conformity file and the commercial invoice prepared to the destination requirement in Netherlands.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: Yes. For the WF-G family AndroidSBC replaces DOA boards from buffer stock and repairs or replaces RMA units in-house, with the failure analysis returned to the Amsterdam integrator so the same fault does not recur on the next lot.

Contact AndroidSBC: Start Your WF-G3601 Sourcing Conversation

To start a WF-G smart guide kiosk Android motherboard sourcing conversation with AndroidSBC, Amsterdam integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Netherlands buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-G family.