H618 HDMI 2.1 TV stick board Wide-Temp for Czech Buyers - Wholesale Projector, Portable Display and

September 28, 2026 supply note: Wanlin Group (Shenzhen, China) opened the H618-PJ170 to Czech brand owners, project integrators and private-label programme teams, Allwinner H618 quad-core SoC, 2GB LPDDR4 + 16GB eMMC, Hardware decode up to 4K@60fps - VP9 Profile-2, Android 12.0 AOSP build for launcher-led projects, HDMI 2.0a UHD output with HDCP, inside its 2026 Projector, Portable Display and In-Vehicle Entertainment Boards export program: Projector, Portable Display and In-Vehicle Entertainment Boards, H618-PJ170, 2GB LPDDR4 + 16GB eMMC, with pico and portable projectors, in-vehicle headrest and rear-seat screens, gaming sticks and compact entertainment devices where the board must run from a 5 V rail inside a small enclosure, configured to the needs of Czech deployment programmes. Wanlin Group as the H618 Android board supplier, exporter and original manufacturer now serves local partners, regional exclusive distributors and strategic OEM clients in more than 60 destination markets, and the Projector, Portable Display and In-Vehicle Entertainment Boards program is open to Czech buyers ordering at factory-direct terms.

Core parameters: Allwinner H618 quad-core SoC, 64-bit architecture, HDMI dongle and TV stick class. CPU 4x ARM Cortex-A53, 64-bit architecture. GPU ARM G31 MP2 GPU, OpenGL ES 3.2 / Vulkan 1.1. Render and decode path G31 MP2 render pipeline with a 4K*2K UHD HDMI output path and HDR handling for streaming apps. Video decode Hardware decode up to 4K@60fps - VP9 Profile-2, H.265 Main10@L5.1 and AVS2 JiZhun 10bit, with H.264 BP/MP/HP@L4.2 up to 4K@30fps and H.263, MPEG-4, MPEG-2, MPEG-1, Xvid, Sorenson Spark, VP8, AVS/AVS+ and WMV9/VC1 up to 1080P@60fps. Camera input USB UVC camera input for conferencing cameras, vision sensors and capture devices. Memory and storage 2GB LPDDR4 + 16GB eMMC. Operating system Android 12.0 AOSP build for launcher-led projects, with OTA upgrade and custom boot animation. Display output HDMI 2.0a 4K*2K UHD output with HDCP handling required by protected streaming apps. Audio output HDMI digital audio passthrough with MP3, AAC, WMA, RM, FLAC and Ogg decode. Interfaces and I/O 1x HDMI 4K*2K UHD output (HDMI 2.0a, HDMI 2.1 signalling on the same connector class), 2x USB (one USB Host port and one USB OTG), 1x IR receiver / remote receiver header, 1x TF card slot supporting 4GB / 8GB / 16GB / 32GB / 64GB. Networking WiFi 802.11 a/b/g/n/ac dual-band 2.4G / 5.8G with 10/100M Ethernet through a USB adapter. Power input DC 5V / 1.5A single-rail input, blue LED for working state and red LED for standby. Duty profile Continuous 24/7 streaming duty in fanless dongle enclosures, with RTC retained and auto power on restoring playback after a mains cut. PCB Compact HDMI dongle PCBA with onboard LPDDR4 and eMMC, HDMI output connector, USB Host plus USB OTG, IR receiver header and TF card slot. Certifications CE / FCC / RoHS / REACH. Wanlin's 2026 export roadmap for Czech also covers custom memory and storage combos, HDMI 2.0a or 2.1 output selection, TF card capacity options, custom peripheral drivers, private-label branding and per-destination certification documentation packages.

Executive Summary - Projector, Portable Display and In-Vehicle Entertainment Boards Export for Global B2B Buyers

Executive summary - 10 buyer-relevant points:

• Featured model H618-PJ170, Projector and Portable Display Boards, Allwinner H618 quad-core SoC, 64-bit architecture, HDMI dongle and TV stick class
• CPU 4x ARM Cortex-A53, 64-bit architecture
• GPU ARM G31 MP2 GPU, OpenGL ES 3.2 / Vulkan 1.1
• Render and decode path G31 MP2 render pipeline with a 4K*2K UHD HDMI output path and HDR handling for streaming apps
• Video decode Hardware decode up to 4K@60fps - VP9 Profile-2, H.265 Main10@L5.1 and AVS2 JiZhun 10bit, with H.264 BP/MP/HP@L4.2 up to 4K@30fps and H.263, MPEG-4, MPEG-2, MPEG-1, Xvid, Sorenson Spark, VP8, AVS/AVS+ and WMV9/VC1 up to 1080P@60fps
• Memory and storage 2GB LPDDR4 + 16GB eMMC
• OS Android 12.0 AOSP build for launcher-led projects, with OTA upgrade and custom boot animation
• Display output HDMI 2.0a 4K*2K UHD output with HDCP handling required by protected streaming apps
• MOQ 100 pcs, lead time 15-25 days, FOB Shenzhen / CIF / EXW / DDP supported, 24 months warranty
• Field reference: marine cabin displays on a charter fleet - streaming bandwidth spend fell 77%
• Target buyer: projector manufacturers, portable display brands, in-vehicle entertainment suppliers, gaming device makers, gaming venue operators and regional Android board distributors
• Contact: Email: Androidsbc@163.com | Phone: +8613261677119 | Website: https://www.androidsbc.com

For sourcing managers evaluating Projector, Portable Display and In-Vehicle Entertainment Boards suppliers, the items below are the ones that normally decide the shortlist and hold up in later disputes. Wanlin Group operates its own 12,000 m2 manufacturing facility in Shenzhen with 8 SMT lines, 4 AOI inspection stations and 2,400 m2 of cleanroom assembly, exporting H618 Android boards to 60+ countries under the AndroidSBC brand. Total cost of ownership for an AndroidSBC Projector, Portable Display and In-Vehicle Entertainment Boards deployment typically runs 40-58% below x86-based media boxes once per-device OS licensing and patch handling are counted. For Czech, this article maps the model line, the economics and the compliance route specific to your market.

Global Projector, Portable Display and In-Vehicle Entertainment Boards Market Overview and 2026 Buyer Demand

Android boards inside pico projectors grew 34% in 2025 as projector brands moved streaming apps onto the device. Putting the player inside the projector removes the HDMI dongle, the cable and the second remote from every kit.

Regional compliance for Czech is anchored on CE under RED 2014/53/EU with Czech documentation and RoHS declarations. Cross-border buyers are advised to verify the certification scope, the HDMI output behaviour and the software build of every board before import, since some China-supplied boards ship without destination radio approval or without the licensed Android build the project actually needs, and either gap can stall customs clearance or a rollout handover.

Reference: A18 HDMI Dongle product specification, Allwinner H618 datasheet, Wanlin Group 2026 H618 export program documentation, field deployment records 2024-2026.

Projector, Portable Display and In-Vehicle Entertainment Boards Engineering Architecture and Hardware Platform

The H618 family is engineered on three pillars: (1) an Allwinner H618 quad-core SoC, 64-bit architecture, HDMI dongle and TV stick class compute block with G31 MP2 render pipeline with a 4K*2K UHD HDMI output path and HDR handling for streaming apps; (2) a display and media pipeline built around Hardware decode up to 4K@60fps - VP9 Profile-2, H.265 Main10@L5.1 and AVS2 JiZhun 10bit, with H.264 BP/MP/HP@L4.2 up to 4K@30fps and H.263, MPEG-4, MPEG-2, MPEG-1, Xvid, Sorenson Spark, VP8, AVS/AVS+ and WMV9/VC1 up to 1080P@60fps; (3) a software layer pairing Android 12.0 AOSP build for launcher-led projects, with OTA upgrade and custom boot animation with OTA tooling, device management and the Allwinner H618 Android 12 BSP, AOSP build support and the AndroidSBC SDK kit. This architecture delivers continuous 24/7 streaming duty at a cost point that undercuts x86 media boxes while keeping the decode range and output stability integrators expect.

Three sub-modules define the engineering depth:

• Compute module - Allwinner H618 quad-core SoC, 64-bit architecture, HDMI dongle and TV stick class. 4x ARM Cortex-A53, 64-bit architecture handles sustained 4K decode, UI rendering and mixed media workloads in fanless enclosures.
• Display and media module - HDMI 2.0a 4K*2K UHD output with HDCP handling required by protected streaming apps. Hardware decode up to 4K@60fps - VP9 Profile-2, H.265 Main10@L5.1 and AVS2 JiZhun 10bit, with H.264 BP/MP/HP@L4.2 up to 4K@30fps and H.263, MPEG-4, MPEG-2, MPEG-1, Xvid, Sorenson Spark, VP8, AVS/AVS+ and WMV9/VC1 up to 1080P@60fps covers VP9, H.265, AVS2 and H.264 at 4K plus the legacy codec range at 1080p, so mixed archives play without transcoding.
• Peripheral and management module - 1x HDMI 4K*2K UHD output (HDMI 2.0a, HDMI 2.1 signalling on the same connector class), 2x USB (one USB Host port and one USB OTG), 1x IR receiver / remote receiver header, 1x TF card slot supporting 4GB / 8GB / 16GB / 32GB / 64GB. Headless operation is supported for display-only units fed over the site network, and the toolchain covers Allwinner H618 Android 12 BSP, AOSP build support and the AndroidSBC SDK kit, OTA upgrade, boot animation customization, pre-installed app support and launcher customization for remote fleet management.

Mechanically the board is a Compact HDMI dongle PCBA with onboard LPDDR4 and eMMC, HDMI output connector, USB Host plus USB OTG, IR receiver header and TF card slot, which is why it drops into pocket shells, behind-panel mounts and projector cavities originally drawn around a larger media box without a tooling change.

Featured Model - H618-PJ170 Wide-Temp Technical Signature

The featured model is H618-PJ170, part of the Projector and Portable Display Boards family, configured in this batch with 2GB LPDDR4 memory and 16GB eMMC storage. FOB Shenzhen reference price is $43.50 per piece at MOQ 100 pcs, with bulk tier pricing from $37.41 to $48.72 depending on memory and storage combination, regional certification and packaging artwork. Lead time is 15-25 days from PO confirmation and 30% T/T deposit receipt, with a 24-month warranty.

The technical signature of H618-PJ170 on this configuration is documented below. Every parameter is verified by our Shenzhen lab against the HDMI output behaviour of mainstream televisions and displays, the electrical limits of IEC / UL 62368-1 and the USB timing requirements of cameras, microphones and storage devices.

Specification	Value
soc_platform	Allwinner H618 quad-core SoC, 64-bit architecture, HDMI dongle and TV stick class
cpu_core	4x ARM Cortex-A53, 64-bit architecture
gpu_3d	ARM G31 MP2 GPU, OpenGL ES 3.2 / Vulkan 1.1
render_decode_path	G31 MP2 render pipeline with a 4K*2K UHD HDMI output path and HDR handling for streaming apps
video_decode	Hardware decode up to 4K@60fps - VP9 Profile-2, H.265 Main10@L5.1 and AVS2 JiZhun 10bit, with H.264 BP/MP/HP@L4.2 up to 4K@30fps and H.263, MPEG-4, MPEG-2, MPEG-1, Xvid, Sorenson Spark, VP8, AVS/AVS+ and WMV9/VC1 up to 1080P@60fps
camera_input	USB UVC camera input for conferencing cameras, vision sensors and capture devices
memory_storage	2GB LPDDR4 + 16GB eMMC
os_android	Android 12.0 AOSP build for launcher-led projects, with OTA upgrade and custom boot animation
display_out	HDMI 2.0a 4K*2K UHD output with HDCP handling required by protected streaming apps
audio_out	HDMI digital audio passthrough with MP3, AAC, WMA, RM, FLAC and Ogg decode
interfaces_io	1x HDMI 4K*2K UHD output (HDMI 2.0a, HDMI 2.1 signalling on the same connector class), 2x USB (one USB Host port and one USB OTG), 1x IR receiver / remote receiver header, 1x TF card slot supporting 4GB / 8GB / 16GB / 32GB / 64GB
networking	WiFi 802.11 a/b/g/n/ac dual-band 2.4G / 5.8G with 10/100M Ethernet through a USB adapter
power_input	DC 5V / 1.5A single-rail input, blue LED for working state and red LED for standby
electrical_limits	DC 5V / 1.5A single-rail input, blue LED for working state and red LED for standby, RTC retained with auto power on after a mains cut
duty_profile	Continuous 24/7 streaming duty in fanless dongle enclosures, with RTC retained and auto power on restoring playback after a mains cut
pcb_mechanics	Compact HDMI dongle PCBA with onboard LPDDR4 and eMMC, HDMI output connector, USB Host plus USB OTG, IR receiver header and TF card slot
certifications	CE / FCC / RoHS / REACH
use_case	pico and portable projectors, in-vehicle headrest and rear-seat screens, gaming sticks and compact entertainment devices where the board must run from a 5 V rail inside a small enclosure

Projector, Portable Display and In-Vehicle Entertainment Boards Application Scenarios across Deployment Sites

Instead of restating features, the entries below report where Projector, Portable Display and In-Vehicle Entertainment Boards already work: the site, the fleet size and the figure that moved.

Scenario 1: marine cabin displays on a charter fleet (Malaga, Spain). A charter operator fitted 96 cabin units with HDMI audio passthrough to the cabin amplifier and local media on USB, since satellite links at sea are metered and slow. Measured result: streaming bandwidth spend fell 77% and guest complaints about buffering dropped to zero.

Scenario 2: pico projectors in a sales enablement kit (Stuttgart, Germany). A field sales organisation issued 420 pico projectors with the board inside the projector shell, running presentation content from TF card so a customer meeting never depends on venue WiFi. Measured result: meeting setup failures fell to zero and laptop adapter returns dropped 88%.

Scenario 3: gaming venue sticks with offline title libraries (Surabaya, Indonesia). A gaming venue operator deployed 210 sticks holding title launchers and cached assets on eMMC, so a venue keeps trading when the upstream link is throttled. Measured result: venue downtime tied to network issues fell 91% and per-session start time dropped 43%.

Scenario 4: business projectors in a hotel conference floor (Calgary, Canada). A hotel installed 54 business projectors with the board handling both the local presentation app and casting from guest laptops on one HDMI path. Measured result: conference room setup time fell 66% and switcher hardware cost per room dropped 47%.

Scenario 5: industrial display units in a plant training room (Lyon, France). A manufacturer fitted 38 industrial display units in a training room with a rugged enclosure, sealed connectors and a pinned app set that survives shift changes. Measured result: device misuse incidents fell to zero and training session setup time dropped 72%.

AndroidSBC Projector, Portable Display and In-Vehicle Entertainment Boards Competitive Advantages for Cross-Border Buyers

The H618 board and the wider AndroidSBC streaming device portfolio deliver eight advantages for cross-border B2B buyers sourcing from Chinese manufacturers:

1. Source-factory pricing - Wanlin operates the SMT lines, so FOB Shenzhen pricing runs 40-58% below western-branded x86 media boxes with no per-device licence fee.
2. HDMI output coverage - HDMI 2.0a and HDMI 2.1 signalling up to 4K*2K UHD at 60 fps, with mode selection and auto frame-rate handling, because the display handshake is the first thing an installer gets wrong.
3. Decode range without transcoding - VP9 Profile-2, H.265 Main10, AVS2 JiZhun 10bit and H.264 at 4K, plus H.263, MPEG-4, MPEG-2, MPEG-1, Xvid, Sorenson Spark, VP8, AVS and WMV9/VC1 at 1080p, so legacy archives play as they are.
4. Radio coverage - WiFi 802.11 a/b/g/n/ac/ax at 2.4G and 5.8G with Bluetooth remote support, so one board serves retail, hospitality and operator channels.
5. Casting protocol coverage - Miracast, DLNA, AirPlay and Google Cast support with 5.8G band steering, so meeting room and classroom products ship without a protocol rewrite.
6. Peripheral and service path - 1x HDMI 4K*2K UHD output (HDMI 2.0a, HDMI 2.1 signalling on the same connector class), 2x USB (one USB Host port and one USB OTG), 1x IR receiver / remote receiver header, 1x TF card slot supporting 4GB / 8GB / 16GB / 32GB / 64GB, covering 2.4G keyboard and mouse pairs, USB cameras and microphones, USB storage, TF cards up to 64GB and service access through the OTG port.
7. Multi-OS flexibility - Android 12.0 AOSP build for launcher-led projects, with OTA upgrade and custom boot animation, so Google Play products, AOSP kiosk builds and private-label launcher programmes run on one board.
8. Unattended reliability - RTC retention, auto power on after a mains cut, OTA with a canary ring and continuous fanless duty in closed enclosures.

Combined, these advantages let AndroidSBC partners win streaming, signage, casting, education and private-label programmes, secure regional distribution rights, and serve end customers under their own brand at a landed cost 35-45% below legacy suppliers.

Projector, Portable Display and In-Vehicle Entertainment Boards Certifications, Electrical Performance and Assembly Notes

The H618-PJ170 carries CE / FCC / RoHS / REACH as standard scope. Optional add-on documentation available on request includes UKCA, KC, PSE, SAA, RCM and EAC packs, country-specific declaration templates and UL 62368-1 test reports. All boards are produced in an ISO 9001:2015 and ISO 14001:2015 certified factory with RoHS and REACH declarations issued per batch.

Electrical performance measured at the bench: DC 5V / 1.5A single-rail input, blue LED for the working state and red LED for standby, RTC retained across a mains cut and auto power on restoring playback without a button press. The board is specified for Continuous 24/7 streaming duty in fanless dongle enclosures, with RTC retained and auto power on restoring playback after a mains cut, which covers pocket shells, behind-panel mounts and projector cavities with no fan and no vent.

Assembly and integration notes taken from the A18 HDMI Dongle datasheet, which every integration team should run through before closing an enclosure:

• Size the 5 V supply at 1.5 A or more and measure the voltage at the dongle end of the cable, since a thin USB harness drops enough voltage to cause a boot loop
• Match the HDMI connector orientation to the enclosure drawing and strain-relieve the cable, because a dongle hanging from the port loads the solder joints rather than the shell
• Keep the IR receiver window clear of the enclosure wall and away from the LED indicator, so the remote path is not blocked by the housing
• Insert and eject the TF card with power removed and format it inside the device before loading content, since a hot swap during playback corrupts the file index
• Leave the USB OTG port available for service and firmware recovery, because field updates and log capture run through that port
• Keep the internal airflow path open, since the board is fanless and depends on the housing for heat spreading
• Handle the PCBA with ESD protection and avoid flexing the board when clipping it into the shell

Cross-border buyers should note that streaming device compliance combines product marking, radio certification and safety evaluation. For Czech specifically, importers should confirm CE under RED 2014/53/EU with Czech documentation and RoHS declarations before shipment. Wanlin provides a pre-validated compliance package per model with DoC templates, test report copies and label artwork, reducing importer certification lead time from a typical 2-3 months to 1-2 weeks for most markets.

Projector, Portable Display and In-Vehicle Entertainment Boards Economics, MOQ, Lead Time and Logistics Math

For a first-time buyer ordering 1,000 pieces of the H618-PJ170, the economics stack is:

Cost Layer	USD per piece	USD for 1000 pcs
FOB Shenzhen factory price	$43.50	$43500.00
+ Sea freight FCL 40HQ (estimated)	$2.10	$2100.00
CIF destination port	$45.60	$45600.00
+ Customs duty 3%-10% (region dependent)	$0.64	$637.10
+ Local delivery + warehousing	$3.80	$3800.00
DDP landed cost	$50.04	$50040.00

Sample order cost is USD 60 per SKU refundable against the first bulk order above MOQ. 30% T/T deposit and 70% balance against B/L copy is the standard payment term; L/C at sight is accepted for orders above USD 80,000. Production lead time is 15-25 days, warranty is 24 months, and free DOA replacement applies within 60 days of receipt.

Projector, Portable Display and In-Vehicle Entertainment Boards FAQ - OEM, ODM, MOQ, Lead Time, Partnership

Below are eight frequently asked questions from cross-border buyers sourcing H618 Android boards from China. Each answer is anchored on Wanlin's commercial terms, certification scope and field experience across 60+ export markets under the AndroidSBC brand.

What is the difference between OEM and ODM for Projector, Portable Display and In-Vehicle Entertainment Boards?

Answer: OEM (Original Equipment Manufacturer) means Wanlin Group builds the H618 board, HDMI dongle, TV stick or finished media device under your brand with your PCB silk-screen, logo, packaging and SKU. ODM (Original Design Manufacturer) means we redesign the carrier board, memory and storage combination, I/O set, HDMI connector placement, firmware or enclosure around your project. Both run from the same Shenzhen factory and the same firmware team: OEM lead time is 15-25 days and ODM 25-40 days including pre-compliance checks. Schematic review, custom carrier layout, AOSP build work, driver tuning and certification support are provided under NDA.

Which H618 board should I source for my application?

Answer: Eight selection rules for cross-border buyers:

• (1) HDMI dongles and pocket TV sticks: H618-DG110 / H618-DG130 with Android 12, 4K HDMI output and OTA upgrade.
• (2) TV boxes and OTT or IPTV set-top boxes: H618-TB120 / H618-TB140 with dual-band WiFi, IR remote support and local plus network media playback.
• (3) Screen mirroring and wireless presentation: H618-CS110 / H618-CS130 with Miracast, DLNA, AirPlay and Google Cast support and 5.8G band steering.
• (4) Signage players and menu boards: H618-SG120 / H618-SG140 with loop, timed and scheduled playback plus local content fallback.
• (5) Smart home hubs and IoT gateways: H618-SH130 / H618-SH150 with local rule execution, per-unit identity provisioning and USB device support.
• (6) Education and meeting rooms: H618-ED120 / H618-ED140 with casting, kiosk lock-down, pre-bonded keyboard and mouse pairs and USB camera input.
• (7) Projectors, portable displays and in-vehicle screens: H618-PJ130 / H618-PJ150 with a 5 V rail, offline media libraries and a cold-start profile.
• (8) Private-label programmes and redesign work: H618-OD170 / H618-OD180 with carrier redesign, BSP porting, signed firmware, per-unit identity provisioning and a last-time-buy window.

What software support comes with the boards?

Answer: Every board ships with the Android 12.0 image (Android 12.0 AOSP build for launcher-led projects, with OTA upgrade and custom boot animation), BSP source access, driver documentation, SDK material and OTA tooling. The Android build ships with Google Play access where the destination market and product category qualify; for projects that do not need Google services, the same hardware runs a full AOSP build, which also lowers unit cost. Kiosk-mode launchers, auto-start app configuration, custom boot animation, scheduled behaviour and remote publishing agents are part of the standard integration work. The media stack covers MP3, AAC, WMA, RM, FLAC and Ogg audio with HD JPEG, BMP, GIF, PNG and TIF images, and the video stack covers VP9, H.265, AVS2, H.264, H.263, MPEG-4, MPEG-2, MPEG-1, Xvid, Sorenson Spark, VP8, AVS and WMV9/VC1.

How do Wanlin H618 boards compare with branded streaming sticks and x86 media boxes?

Answer: Because Wanlin builds the boards rather than reselling them, landed cost typically runs 40-58% below western-branded x86 media boxes and 22-34% below a resold retail stick on equivalent HDMI output and decode support. On the engineering side, this configuration brings Allwinner H618 quad-core SoC, 64-bit architecture, HDMI dongle and TV stick class, 4x ARM Cortex-A53, 64-bit architecture and ARM G31 MP2 GPU, OpenGL ES 3.2 / Vulkan 1.1, with the BSP covering Android 12.0 AOSP build for launcher-led projects, with OTA upgrade and custom boot animation. Licensing cost also disappears: media PCs carry per-device OS licence fees and patch cycles, while the Android build carries none. The compact dongle PCBA also drops into enclosures that were designed around a larger media box, which usually removes an external power supply and one remote from the kit.

Can the board drive the display and the full peripheral set?

Answer: Yes. HDMI 2.0a 4K*2K UHD output with HDCP handling required by protected streaming apps. The peripheral stack covers 2.4G wireless keyboard and mouse pairs, Bluetooth voice remotes, IR remote receivers, USB cameras and conferencing microphones, USB storage and hard disks for local libraries, TF cards up to 64GB for offline content and Ethernet through a USB adapter. Audio reaches the display over HDMI and passes through to AV receivers. Drivers ship with the image; if a peripheral is not yet in our driver library, our firmware team writes and validates the driver as part of the ODM scope.

What are the MOQ, lead time, trade terms, sample policy and warranty?

Answer: MOQ is 100 pcs per model. Lead time is 15-25 days for standard configurations and 25-40 days for ODM customization. Trade terms are FOB Shenzhen, CIF by sea or air, EXW factory and DDP door-to-door. Payment is 30% T/T deposit with 70% balance against the B/L copy; L/C at sight is accepted above USD 80,000. Samples ship in 1-3 days via DHL Express at USD 60 per SKU, refundable against the first bulk order. Warranty is 24 months, with free DOA replacement within 60 days of receipt.

Which certifications do the boards carry and what is included for importers?

Answer: Boards ship with CE / FCC / RoHS / REACH declarations per batch from an ISO 9001:2015 and ISO 14001:2015 certified factory. UKCA, KC, PSE, SAA, RCM, EAC and UL 62368-1 report documentation is available on request, and CE under RED 2014/53/EU with Czech documentation and RoHS declarations. We provide DoC templates, test report copies, label artwork and a pre-validated compliance package per model, which shortens importer certification lead time from a typical 2-3 months to 1-2 weeks for most markets. GMS certification support is available where the destination requires Google Play distribution.

What customization and partnership options does Wanlin offer?

Answer: Customization scope:

1. (1) Branding - custom PCB silk-screen, private-label logo on board and enclosure, custom SKU, packaging and boot animation.
2. (2) Firmware - custom launcher, kiosk lock-down, pre-installed apps, multilingual UI packs, custom boot logo and OTA channel.
3. (3) Hardware - carrier board redesign, HDMI connector placement and orientation, TF card capacity selection, memory and storage combinations (2GB-4GB LPDDR4, 16GB-32GB eMMC), HDMI 2.0a or 2.1 output selection, IR receiver placement, USB Host and USB OTG layout and antenna routing.
4. (4) Software - AOSP build service, BSP porting, peripheral driver development, SDK modules, remote publishing agent integration and casting protocol configuration.
5. (5) Delivery - DDP shipping, FBA or overseas-warehouse labelling, per-batch MAC and serial provisioning.

Partnership tiers: Authorized Reseller (list price), Regional Distributor (20% off, single-country exclusivity) and Strategic OEM Partner (30% off, multi-country exclusivity, dedicated engineering team).

Wanlin Global Partner Stories - Real Project References

The references below come from anonymized 2024-2026 projects across 60+ export markets; cities and figures are real, buyer names are withheld.

The table below is anonymized by agreement but every row carries a real city, application and quantified outcome from 2024-2026.

City	Application	Outcome
Lagos, Nigeria	board with local filing support	a gaming venue operator needed regional radio filings before a rollout; Wanlin coordinated the filings and delivered pre-validated test copies.
Graz, Austria	one board across projector and vehicle products	a manufacturer ships the same PCBA into a projector shell and a headrest enclosure, holding one firmware branch across 11 accounts.
Ho Chi Minh City, Vietnam	boards cleared per shipment	a distributor requires per-shipment conformity certificates; the factory prepares the file with every batch so customs release clears within 48 hours.
Tromso, Norway	board with a cold-start profile	a vehicle upfitter specified a cold-start profile and a low-temperature enclosure plan for headrest units in a northern fleet.

Partnership Models - Authorized Reseller, Regional Distributor, Strategic OEM

Wanlin offers three partnership tiers for cross-border buyers of Projector, Portable Display and In-Vehicle Entertainment Boards:

• Authorized Reseller - annual volume USD 20,000+, list price, no exclusivity, standard 24-month warranty, dedicated account manager with a response within 4 business hours.
• Regional Distributor - annual volume USD 80,000+, 20% off list, single-country exclusivity, co-marketing budget, joint certification cost-share, free BSP and firmware updates for the life of the product.
• Strategic OEM Partner - annual volume USD 250,000+, 30% off list, multi-country exclusivity, dedicated engineering team, joint roadmap, 18-month price lock and one joint trade-show booth per year at GITEX Global, Smart City Expo World Congress, Canton Fair or the Hong Kong Electronics Fair in Hong Kong, China on a cost-share basis.

All partners receive free certification documentation and test report copies, custom Android image support, free DOA replacement within 60 days, per-batch MAC and serial provisioning, and a sample programme with USD 60 per SKU refundable against the first bulk order above MOQ.

Conclusion - How to Start Your Projector, Portable Display and In-Vehicle Entertainment Boards Sourcing Today

Wanlin Group's 2026 H618 export program is open to B2B buyers, regional distributors, cross-border traders and OEM/ODM partners in Czech and 60+ destination markets. To start a sourcing discussion, request a quotation or schedule a factory audit in Shenzhen, contact the export team below. Sample orders ship within 1-3 days via DHL Express for in-stock SKUs; custom-configuration samples require 7-15 days. Standard lead time for bulk OEM orders is 15-25 days, and Strategic OEM Partner applications are reviewed quarterly.

We invite Czech buyers, export traders and trading companies to build long-term cooperation with Wanlin Group as your China-based OEM/ODM partner, regional exclusive distributor or strategic global supplier under the AndroidSBC brand. Wanlin is the manufacturer behind the H618 board line, the SMT lines and aging rooms behind every batch, and this export program. Let's build the Projector, Portable Display and In-Vehicle Entertainment Boards supply chain together.

---

Model: H618-PJ170
Platform: Allwinner H618 quad-core SoC, 64-bit architecture, HDMI dongle and TV stick class
CPU: 4x ARM Cortex-A53, 64-bit architecture
GPU: ARM G31 MP2 GPU, OpenGL ES 3.2 / Vulkan 1.1
Render / decode: G31 MP2 render pipeline with a 4K*2K UHD HDMI output path and HDR handling for streaming apps
Video: Hardware decode up to 4K@60fps - VP9 Profile-2, H.265 Main10@L5.1 and AVS2 JiZhun 10bit, with H.264 BP/MP/HP@L4.2 up to 4K@30fps and H.263, MPEG-4, MPEG-2, MPEG-1, Xvid, Sorenson Spark, VP8, AVS/AVS+ and WMV9/VC1 up to 1080P@60fps
Camera input: USB UVC camera input for conferencing cameras, vision sensors and capture devices
Memory: 2GB LPDDR4
Storage: 16GB eMMC
OS: Android 12.0 AOSP build for launcher-led projects, with OTA upgrade and custom boot animation
Display: HDMI 2.0a 4K*2K UHD output with HDCP handling required by protected streaming apps
Audio: HDMI digital audio passthrough with MP3, AAC, WMA, RM, FLAC and Ogg decode
Network: WiFi 802.11 a/b/g/n/ac dual-band 2.4G / 5.8G with 10/100M Ethernet through a USB adapter
Board I/O: 1x HDMI 4K*2K UHD output (HDMI 2.0a, HDMI 2.1 signalling on the same connector class), 2x USB (one USB Host port and one USB OTG), 1x IR receiver / remote receiver header, 1x TF card slot supporting 4GB / 8GB / 16GB / 32GB / 64GB
Power: DC 5V / 1.5A single-rail input, blue LED for working state and red LED for standby
Duty profile: Continuous 24/7 streaming duty in fanless dongle enclosures, with RTC retained and auto power on restoring playback after a mains cut
PCB: Compact HDMI dongle PCBA with onboard LPDDR4 and eMMC, HDMI output connector, USB Host plus USB OTG, IR receiver header and TF card slot
Cert: CE / FCC / RoHS / REACH
MOQ / Lead / Warranty: 100 pcs / 15-25 days / 24 months
FOB Shenzhen reference price: $43.50 per piece at MOQ 100 pcs
Region: Czech
Contact: Email: Androidsbc@163.com | Phone: +8613261677119 | Website: https://www.androidsbc.com

• Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
• Manufacturer: Wanlin Group / Brand: AndroidSBC / Site: www.androidsbc.com
• Export service: Email: Androidsbc@163.com | Phone: +8613261677119 | Website: https://www.androidsbc.com
• Form factor: Projector and Portable Display Boards / Platform: Allwinner H618 quad-core SoC / PCB: Compact HDMI dongle PCBA with onboard LPDDR4 and eMMC, HDMI output connector, USB Host plus USB OTG, IR receiver header and TF card slot
• Country compliance for Czech: CE under RED 2014/53/EU with Czech documentation and RoHS declarations